Coex Community

What is the Coex Community?

coex-community

Coex Community is the perfect way for our customers to showcase their work and also learn from other 3D printing enthusiasts. Whether your company uses 3D printer filament in rapid prototyping, or you are printing at a local Makerspace or in your home, this community allows everyone to connect and share.

We want to hear about your project!

By showcasing projects with our filament, you can help us work toward perfecting our products to show others what is possible in the 3D printing world.

Coex Community allows customers who use our 3D printer filament to:

  1. Upload and share photos, videos and descriptions of their 3D printing projects.
  2. Provide insight on their printing techniques.
  3. Showcase Coex 3D printing filament capabilities.

How it works

Participation in the community is simple. Join Our Facebook Community and share your 3D printing project! Your project will show on the Coex LLC website and our Facebook Group.

Following is a list of information you may consider including:

  • Description of your project
  • Type of 3D printer filament
  • 3D printer filament diameter
  • Filament color
  • Type of printer

Have fun!  We can’t wait to hear from you!

Comments Box SVG iconsUsed for the like, share, comment, and reaction icons
16 hours ago

Anyone here do lithos with Coex PETG? Any suggestions to improve? I'm using a Prusa MK3S and Coex White PETG. Standard Prusa slicer settings. Temp 245/85. The image comes out great, but the back side takes a lot of clean up. ... See MoreSee Less

Anyone here do lithos with Coex PETG? Any suggestions to improve? Im using a Prusa MK3S and Coex White PETG. Standard Prusa slicer settings. Temp 245/85. The image comes out great, but the back side takes a lot of clean up.Image attachmentImage attachment
4 days ago

Today I learned the crab is now available on their site! Printed with a .8 nozzle at .6 layer height an am8ish with a beta revo in Coex mystery filament. There are a couple rough spots but printed like a champ for something that normally prints functional stuff. ... See MoreSee Less

Today I learned the crab is now available on their site! Printed with a .8 nozzle at .6 layer height an am8ish with a beta revo in Coex mystery filament. There are a couple rough spots but printed like a champ for something that normally prints functional stuff.
5 days ago

Morning! All of a sudden, I am getting these unfinished areas, and these lines when printing. Not sure why - can anyone help? I really appreciate it. I am printing on a mini prusa with PETG. ... See MoreSee Less

Morning! All of a sudden, I am getting these unfinished areas, and these lines when printing. Not sure why - can anyone help? I really appreciate it. I am printing on a mini prusa with PETG.Image attachment
4 days ago

What does Rust Orange PETG look like in person (or a picture of a finished print?)

Based on the pictures on the website, it seems darker than I want, so I've been ordering another brand for my Orange, but that stuff is clogging like crazy, so I'd rather use good reliable stuff if I can - the problem is, rust Orange seems too dark.

I'd love a more "Prusa Orange" or a even just a lighter "Construction barrel" Orange :), but if the Rust Orange prints up lighter than it looks, maybe that'd work.
... See MoreSee Less

4 days ago

Sometimes you just have to design and print your own toys 🙂 1:12 scale ... See MoreSee Less

Sometimes you just have to design and print your own toys :) 1:12 scaleImage attachmentImage attachment
4 days ago
Coex3D

Whoops! Can you tell we had a case of the Mondays? Even the smartest folks can sometimes make mistakes. Our Cyber Monday promotion was going great until the promo shut down 6 hours early.

For those who may have missed out, we want to make this up to you and continue our super deal for one more day. We’re calling it Technical Issue Tuesday.

Everyone has until midnight, CST to take advantage & save up to 25% off all of our filaments!
... See MoreSee Less

Whoops!  Can you tell we had a case of the Mondays?  Even the smartest folks can sometimes make mistakes.  Our Cyber Monday promotion was going great until the promo shut down 6 hours early.  

For those who may have missed out, we want to make this up to you and continue our super deal for one more day.  We’re calling it Technical Issue Tuesday.

Everyone has until midnight, CST to take advantage & save up to 25% off all of our filaments!
1 week ago

Quick question. I took few months off printing as i've been busy working my job. On avg if need to how long and at what temp would be recommend to dry filament for. All pla + ?
Wanna get into printing again for Xmas gifts and also few things wanna print for my service truck. I recently bought a sunlu dryer just in case. I did have to use as my first filament was brittle.
About 90% of my filament is all COEX as I love colors and fact is USA and I was able to talk with a gentleman for about 45 mins via zoom. Much appreciated.
Reading I've seen is about 3 to 4 hrs a roll at 55°c.
... See MoreSee Less

5 days ago
Coex3D

Hey valuable Coex #CyberMonday customers- i just realized that somehow our Cyber Monday promo shut off at 6:00 PM this evening. That should NOT have happened. It is fixed now so if anyone wanted to order and the discount didn't show up you can try again. Please accept our apologies on this mix up. ... See MoreSee Less

Hey valuable Coex #CyberMonday customers- i just realized that somehow our Cyber Monday promo shut off at 6:00 PM this evening.  That should NOT have happened.  It is fixed now so if anyone wanted to order and the discount didnt show up you can try again.  Please accept our apologies on this mix up.
5 days ago

Anyone have an example of "Legion Grey PLA" that they could share?
I'm thinking about ordering some but would like a better idea of what it's like before submitting the order. Thanks in advance!
... See MoreSee Less

1 week ago

What’s the color of the month? ... See MoreSee Less

3 weeks ago

Morning! I tried using PLA for the first time on my mini prusa and the filament is getting 'chewed' up by the extruder gear, but another PLA brand I tested does not and printed fine. The tension is set the same for both brands, and I tried increasing and decreasing and it still gets chewed up by the gear. Any suggestions? I am trying to use the COEX Aqua Blue 1.75 ... See MoreSee Less

4 weeks ago

Was printing fine then this happened. Got stringy all of a sudden and stopped extruding. Brand new nozel. Bad filament? ... See MoreSee Less

Was printing fine then this happened. Got stringy all of a sudden and stopped extruding. Brand new nozel. Bad filament?Image attachment
3 weeks ago
Coex3D

Friday!! Let's see your best Friday GIF ⬇️ ... See MoreSee Less

4 weeks ago

My dogs kept breaking the holders that attach their feeding bowls to the inside of their wire kennels. I could keep buying new feeding bowls every time they break them, but I figured that's what 3D printing is for!

Here's a link for anyone that would want to print them, too!
www.thingiverse.com/thing:5110155
... See MoreSee Less

1 month ago

Do i have a favorite brand of filament? Yes. ... See MoreSee Less

Do i have a favorite brand of filament?  Yes.
1 month ago

Blueberry PETG is gorgeous. Pictures don't do it justice ... See MoreSee Less

Blueberry PETG is gorgeous.  Pictures dont do it justice
Load more
SHARE YOUR CART