PLA Details

Pantone 200C

Scarlet Red PLA 1.75mm Product Photo

Scarlet Red PLA 1.75mm

1.75mm | 1 kg

$23.99

Diameter:
1.75mm Diameter
Weight:
1 kg Weight
Color:
Select Lilac Purple Color Option Select Plum Purple Color Option Select Navy Color Option Select Chartreuse Color Option Select Bone Brown Color Option Select Neon Green Color Option Select Pumpkin Orange Color Option Select Sparkle Silver Color Option Select Sparkle Inferno Color Option Select Sparkle Cobalt Color Option Select Sparkle Scarlet Color Option Select Iced Amethyst Color Option Select Stone Gray Color Option Select Metallic Silver Color Option Select Metallic Gunmetal Silver Color Option Select Taxicab Yellow Color Option Select Green Bay Yellow Color Option Select Glow in the Dark Color Option Select Neon Green Color Option Select Olive Green Color Option Select Green Bay Green Color Option Select Ocean Blue Color Option Select Cobalt Blue Color Option Select Construction Yellow Color Option Select White Color Option Select Black Color Option Select Salsa Red Color Option Select Scarlet Red Color Option Select Maroon Color Option Select Inferno Orange Color Option Select Magenta Pink Color Option Select Natural Color Option Select Aqua Blue Color Option
Qty:
Product Specs
Reviews
Product Specs

Item Number: CX02-1500-18-1KG

Closest Pantone Color: 200C

Weight: 1 kg

Color: Scarlet Red

Diameter: 1.75mm

Material: Polymer

Physical Properties: Density – 1.24 g/cm³

Thermal Properties: Melting Point 145° C to 160° C

Run Temperature: 215°-235° C

Product Description

PLA 3D printer filament is the most environment-friendly 3D filament solution. Because of its low toxicity, PLA filament is a very popular choice in the 3D printing community.

1
0
0
0
0

Login to Write a Review

Great Filament

Great color (vibrant, some cool iridescence in the right light), and prints with no issues. It's a little translucent in thin layers (can see bed lettering through the first 0.2mm layer), which occasionally tricked the optical filament sensor in my Original Prusa i3 MK3, but I turned that off and it still prints fine. Using the default "Generic PLA" preset in Slic3r PE I tested a temperature tower (thingiverse #2729076) from 250C to 200C and it looked nearly perfect over the whole range - some odor above the recommended max of 235C, and duller finish below the recommended min of 215C, but overhangs, spans, and stringing were all great (stringing got worse above 235C, but even then still well within acceptable). The beginning of my spool measured almost exactly 1.75mm (0.069 on my inch dial calipers), but about 1m in it settled out to 0.068in (1.73mm) and stayed nearly constant for the first quarter of the spool or so (as far as I've gotten). Thinnest I measured was a little over 0.067in (~1.71mm) in one place within the first 1m, so even though it's not specified, it's easily within the 1.75mm +/- 0.05mm "standard". I've got it set to 1.73mm in my slicer and have nearly perfect results so far, with no visible under- or over-extrusion.

|

You May Also Like

Related products

"We've been using plastic filament from COEX since they started doing business, and could not be happier.  Product quality is very good, and service is exceptional.  We frequently need product on very short notice, and instead of finding an excuse for not meeting the date, they find a way to make it happen.  We appreciate and value COEX as a supplier.  A true business partner!" — Ed R.