Magigoo Details


Magigoo PA 50ml

$26.95

Product Description

  • Easy application: applying Magigoo is as easy as child's play. Shake, press, apply. Spread on an active printing area only. No need to cover the whole surface
  • Easy-release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled.
  • Easy-clean: Magigoo is easily cleaned with water.
  • Long-lasting: Magigoo last for 100+ average prints.
  • Odorless and safe: Magigoo is safe to use - be it in a closed room or educational workshop with kids.

Purchase this product now and earn 27 Print Points!
Qty:
Description Specs
Product Specs
Reviews
Product Description

Magigoo PA

 

WHAT: MAGIGOO PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

 

WHY:

PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA6,6 and PA6, sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibres. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

 

Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D-printing build surfaces and their higher tendency to warp. Furthermore there are several classes of PA filaments each behaving differently. MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types

 

HOW:

MAGIGOO PA has been designed and tested to work with different PA and fiber reinforced filament brands.

  • Shake the bottle.
  • Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
  • Print according to the filament/printer manufacturers recommendations
  • Allow to cool and Remove. The print should pop right off
  • Clean – Use a damp cloth to wipe off.

 

SAFETY:

Using this product with other than PA type filaments might cause over adhesion and damage your build surface.

 

Tips:

For larger prints a 20 mm brim is recommended

In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier

Product Specs

Item Number: RX04-0002-MG-50ML

No Product Reviews Available

"From sales to shipment, we love working with the COEX team!  Not only do they produce consistent, high-quality filament, their team is super flexible and willing to take on all of our requests." — Matt F.